Make this fire and water bowl the centerpiece of your outdoor living area! Our 32" Mesa round accent will add elegance to any pool. This kit comes with the hammered copper bowl along with a 18" flat round pan and 12" penta burner. Remember to add fire glass or lava rock to complete the look. We have even done the math for you and listed the recommended amounts you will need! We recommend having a certified gas professional set up this easy to install feature. You're going to love your Mesa copper fire and water bowl!
PLEASE NOTE: Fire glass can be used with natural gas burning features ONLY. Fireside Expressions is adamant about this for the safety of our valued customers. Because propane is heavier than natural gas, it will sink to the bottom of your feature. Small pieces of fire glass will not allow propane to circulate, and this can lead to the explosion of this particular media. Even with larger fire glass pieces, there is still not enough room for the gas to dissipate from wind and other factors. Lava rock allows propane to dissipate and is the safest choice for propane features.
With a twist of the quarter turn valve and a long stem lighter, your fire bowl will be lit in seconds! Turn the valve to adjust the height of the flames. Use the valve to turn fire bowl off or on.
The ignition system does a safety check before it turns on the gas. When the hot surface igniter starts to glow, your fire bowl is ready to light up the night!
The fire glass colors shown online may differ slightly from the actual product appearance.
Please check with your local government agency regarding laws and regulations on outdoor fire features. We cannot accept returns based on ordinance code restrictions.
|Bowl Top Diameter:||32 Inches|
|Bowl Base Diameter:||15 Inches|
|Bowl Height:||15 Inches|
|Fire Pit Insert Pan:||18 Inches|
|Burner Size:||12 Inch Penta Burner|
|Power:||24 Volt AC|
|Bowl Material:||Hand Hammered Copper|
Usually ships within 3-4 weeks, though can take longer depending on order volume.
BEFORE PURCHASING, PLEASE NOTE THE FOLLOWING:
Hearth Product Controls Company warranties product against manufacturing defects that prevent safe and correct operation of the product commencing from the date of original sale or shipment from HPC. The warranty on parts and in-house labor will apply only to claims presented to us by our original customer and is in lieu of all other warranties expressed or implied . The defective product must be shipped back with a Return Merchandise Authorization (RMA) issued by HPC for that specific product which states the nature of the defect or warranty claim.
Please feel free to contact us if you have any questions or need more information about this product using the New Question tab. Please ONLY SUBMIT product questions. For all other questions go to contact us,
No posts found