Match-lit 24" burner with ball valve kit, flex line, and trough style pan

Unit can be used with a small 20 gallon propane tank Can be used with a 20 pound propane tank.

HPC 24 Inch Linear Trough Match Lit Fire Pit Kit

Price in points: 30200 points
Add to Wishlist


Constructed from high quality 304 stainless steel, this 24" match-lit kit provides the reliability you need to complete your DIY fire pit project! Crafted with staggered portholes to prevent the burner pan from collecting heat, your finished fire pit top will be protected. A manual ball valve allows for simple & reliable control over the flow of gas and flame output. Strike a long stem match or lighter while you slowly open the gas valve and the simple ignition process is complete. Arriving neatly assembled, installation will be a breeze for your contractor.

This burner kit is designed for both natural gas and propane applications, and comes complete with all the necessary fittings. You'll receive a sealed control box with an attached flexible gas line. Propane units will include a wire mesh guard to keep any debris from clogging the unit. 

For more information on this linear fire pit kit, give our experts a call at 1-888-986-1535 today!


  • This fire pit kit requires a hard pipe, fittings, and an enclosure with an access door for the gas valve. 
  • We recommend choosing ONE type of media for your HPC 24 Inch Linear Trough Match Lit Insert. Please see chart at right to determine the amount you will need.
    How It Works:
    • Start Up: Light a long-stem lighter next to the burner then SLOWLY turn the gas on with the key. The key should be left in valve during use.
    • Operation: You can adjust the height of the flames by turning the key and releasing more or less gas into your fire feature. Counterclockwise adds more flame, and clockwise lowers the flames.
    • Shut Down: To turn off your fire feature just simply turn the key clockwise to the off position, and then remove the key from the unit. Make sure you place your key in a safe place.
Material: #304 Stainless Steel
BTU: 50,000
Burner Pan Size: 24 Inches
Burner Pan Depth: 1-1/2 Inches
Burner Size: 23 Inch T-Burner
Top off your insert with ONE of the following:
Media Amount You'll Need
Fire Glass (natural gas only)  35 Pounds
Lava Rock 50 Pounds
Black River Rock 15 Pounds (1 box)
Multicolor River Rock 15 Pounds (1 box)
Features & Benefits: 
  • Fully assembled and ready to install, which means more time for you to enjoy your new fire feature.
  • Pan has drilled holes to allow for drainage.
  • The flex line configuration provides versatile and simple installation of the unit.
  • Valve mounting bracket included for safe mounting of the control valve.
  • Flame height is adjustable with the valve control knob. Produce a low flame for romantic evenings or a higher flame to keep you warm on chilly nights.
  • Natural gas or liquid propane - factory built and tested for either fuel type.
  • UL certified in US and Canada to ANSI Z21.97-2014/ CSA 2.41-2014 requirements.
  • The sidewall helps with the media retention.
  • Pan lip provides for recessed burner.
  • Perfect for those fire pits without electricity.
  • No hassle with fire wood.
  • Made from 304 Stainless Steel - made to last for several years to come.
  • Add fire glass (natural gas option, only) or lava rock to keep your burner in pristine condition.
  • Weather resistant stainless steel "T" shape burner. 
  • Fire jets are precision-drilled for a great burn every time.
  • 36" Whistle free flex line, so you have a quiet burning fire. 

Each kit requires at least a 2" clearance underneath for drainage.

Estimated Lead Time

Please allow us 2-4 weeks, plus shipping to create this custom product for you.

Warranty Information

Limited Warranty

Manufactures warranties HWI fire pits against manufacturing defects that prevent safe and correct function as follows:

  • Electronics, Gas Valve, : Commercial-1yr; Residential- 3 yr.
  • Pilot Assy : Commercial-1 yr.; Residential-2 yr.
  • Stainless Steel Pan, Fire Ring, & Valve Box: Commercial-1yr.; Residential 5yrs.

This commences from the date of original sale / shipment from the manufacture FOB Dayton, Ohio.

This warranty is for parts and in-house manufacture labor. The defective product must be sent back to the manufacture with a Return Merchandise Authorization (RMA) issued by the manufacture for that specific product and any other additional information for the nature of the defect or warranty claim.

The warranty does not cover items that have been damaged by overheating, modification, abuse, or improper storage. Also any labor involving installation or maintenance with the unit is not covered.

This warranty excludes claims for consequential, indirect-collateral expenses arising from product defects or warranty recovery.

Product Question

Please feel free to contact us if you have any questions or need more information about this product using the New Question tab. Please ONLY SUBMIT product questions. For all other questions go to contact us,


No posts found

Write a review
Last updated on October 19th 2017.

24 Hour Customer Support Serive

Subscribe To Our Newsletter

Get the latest news, reviews, and deals in your email!