Fire pit 18 inch burner insert flat pan with penta burner

HPC 30 Inch Round Flat Pan Match Lit Fire Pit Kit

Price in points: 52700 points
Add to Wishlist


Don't let the flat shape of the 30" pan fool you: The burner mounted to it will give you a complex, natural-looking flame. This unit from HPC features an 18" diameter star-shaped "penta" burner that uses staggered gas jets along the length of the tube to create a more natural-looking, full flame while using less natural gas fuel than normal round burner rings! The flat pan is designed to be built into a round paver stone fire pit, but also acts as a stabilizer/heat shield for installation in round fire bowls with a tapered bottom.

Everything ships fully assembled to make your installation as painless as possible. Connect the valve to a convenient and accessible area, then use the 3' long flex line to drop the pan into the bowl.


PLEASE NOTE: This fire pit kit requires a hard pipe, fittings, and an enclosure with an access door for the gas valve. 

How It Works:
  • Start Up: Light a long-stem lighter next to the burner then SLOWLY turn the gas on with the key. The key should be left in valve during use.
  • Operation: You can adjust the height of the flames by turning the key and releasing more or less gas into your fire feature. Counterclockwise adds more flame, and clockwise lowers the flames.
  • Shut Down: To turn off your fire feature just simply turn the key clockwise to the off position, and then remove the key from the unit. Make sure you place your key in a safe place


Material: #304 Stainless Steel
BTU: 65,000
Burner Pan Size: 30 Inches
Burner Size: 18 Inch Penta Star
Fire Glass Needed:  75 Pounds
Lava Rock Needed: 50 Pounds
Features & Benefits: 
  • Fully assembled and ready to install, which means more time for you to enjoy your new fire feature
  • Pan has drilled holes to allow for drainage
  • The flex line configuration provides versatile and simple installation of the unit.
  • Valve mounting bracket included, for safe mounting of control valve
  • Flame height is adjustable with the valve control knob, so you are able to have a low flame for the romantic nights or higher flame to keep you warmer on the chilly nights.
  • Natural gas or liquid propane have been factory built and tested for either fuel type.
  • UL certified in US and Canada to ANSI Z21.97-2014/ CSA 2.41-2014 requirements
  • The sidewall helps with the media retention
  • Pan lip provides for recessed burner
  • Perfect for those fire pits without electricity, and no hassle fire wood
  • Made from 304 Stainless Steel, so it is made to last for many years to come
  • Add fire glass or lava rock a top your burner to keep your burner in pristine condition
  • Weather resistant stainless steel Penta shaped burner
  • Fire jets are precision-drilled for a great burn every time
  • Whistle free flex line, so you have a quiet fire burning.

Each kit requires at least a 2" clearance underneath for drainage.

Estimated Lead Time

Please allow us 2-4 weeks, plus shipping to create this custom product for you.

Warranty Information

Limited Warranty

Manufactures warranties HWI fire pits against manufacturing defects that prevent safe and correct function as follows:

  • Electronics, Gas Valve, : Commercial-1yr; Residential- 3 yr.
  • Pilot Assy : Commercial-1 yr.; Residential-2 yr.
  • Stainless Steel Pan, Fire Ring, & Valve Box: Commercial-1yr.; Residential 5yrs.

This commences from the date of original sale / shipment from the manufacture FOB Dayton, Ohio.

This warranty is for parts and in-house manufacture labor. The defective product must be sent back to the manufacture with a Return Merchandise Authorization (RMA) issued by the manufacture for that specific product and any other additional information for the nature of the defect or warranty claim.

The warranty does not cover items that have been damaged by overheating, modification, abuse, or improper storage. Also any labor involving installation or maintenance with the unit is not covered.

This warranty excludes claims for consequential, indirect-collateral expenses arising from product defects or warranty recovery.

Product Question

Please feel free to contact us if you have any questions or need more information about this product using the New Question tab. Please ONLY SUBMIT product questions. For all other questions go to contact us,


No posts found

Write a review
Last updated on September 22nd 2017.

Subscribe To Our Newsletter

Get the latest news, reviews, and deals in your email!