Customize your fire feature with this high quality 37 inch linear interlink electronic ignition fire pit insert with 36 inch T-Burner. It will enable you to enjoy a well built fire pit that produces amazing flames. This is a professional CSA certified system that utilizes a reliable hot surface ignition, and is fully automated with an electronic ignition. This system starts via an optional wall switch, or remote.
The insert comes complete with a 304 stainless steel linear interlink pan and T-burner. The burner features drilled and staggered ports that offer increased efficiency and create better flames. It was designed with a raised hub to help prevent water from seeping into the gas line. The pan offers weep holes for drainage so water does not collect in the pan, and features sidewalls to help hold your fire glass, or any other appropriate media of your choice.
You are going to be the envy of the neighborhood when you have this kit installed in your outdoor fire feature! Call us at 1-888-986-1535 for more information!
PLEASE NOTE: This fire pit kit requires a hard pipe, fittings, and an enclosure with an access door for the gas valve.
Start up: This is done by use of a wall switch or remote control. When the "On" command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame is present, the main burner gas will flow and be ignited by the pilot flame.
Operation: While sitting and enjoying the look and feel of your fire pit, the system is at work monitoring the status of the flame, internal temperatures, voltage and other safety parameters. If the flame happens to go out the system will turn off all gas flow, and then restart by automatically commencing the START sequence.
Includes the convenience and safety features with an optional remote control
Shut Down: To turn OFF the fire pit simply use wall switch, remote control or whole house system
We recommend that you read your manual thoroughly for additional operating specs and safety features.
|Material:||304 Stainless Steel|
|Burner Pan Length:||37 Inches|
|Burner Pan Width:||8 Inches|
|Burner Pan Depth:||1-1/2 Inches|
|Burner Size:||36 Inch T-Burner|
|Media||Amount You'll Need|
|Fire Glass (natural gas only)||25 Pounds|
|Lava Rock||50 Pounds|
|Black River Rock||15 Pounds (1 box)|
|Multicolor River Rock||15 Pounds (1 box)|
Each kit requires at least a 2" clearance underneath for drainage.
Please allow us 2-4 weeks, plus shipping to create this custom product for you.
Manufactures warranties HWI fire pits against manufacturing defects that prevent safe and correct function as follows:
This commences from the date of original sale / shipment from the manufacture FOB Dayton, Ohio.
This warranty is for parts and in-house manufacture labor. The defective product must be sent back to the manufacture with a Return Merchandise Authorization (RMA) issued by the manufacture for that specific product and any other additional information for the nature of the defect or warranty claim.
The warranty does not cover items that have been damaged by overheating, modification, abuse, or improper storage. Also any labor involving installation or maintenance with the unit is not covered.
This warranty excludes claims for consequential, indirect-collateral expenses arising from product defects or warranty recovery.
Please feel free to contact us if you have any questions or need more information about this product using the New Question tab. Please ONLY SUBMIT product questions. For all other questions go to contact us,
No posts found