When choosing a fire pit burner insert, you need to first decide what type of gas you are going to need, natural gas or liquid propane. After that you need to figure out what shape burner and pan you need to finish your gas fire pit. We recommend that you choose the proper fire pit insert that is roughly the same size as your fire pit housing. The last thing you need to do is pick an ignition for your fir pit burner insert. This trough burner insert can be used with both fire pits and fire features. It is a match lit burner ignition and is one of the easiest fire pit inserts that you can buy online to set up and light aside from the remote ignition burners. We have a remote control ignition fire pit burner, but as mentioned before, this one is lit with a match. Be sure to have your fire feature burner properly installed by a certified installer so that you can be sure that your outdoor living area is safe.
PLEASE NOTE: This fire pit kit requires a hard pipe, fittings, and an enclosure with an access door for the gas valve
|Material:||#304 Stainless Steel|
|Burner Pan Size:||30 Inches|
|Pan Depth:||2 3/4 Inches|
|Install Opening Length:||30 1/2 Inch MIN. -- 31 3/4 Inch MAX.|
|Install Opening Width:||6 Inch 1/4 MIN. -- 7 1/2 Inch MAX.|
6 Inches from the Ground
96 Inches from the Ceiling
Please allow us 2-4 weeks, plus shipping to create this custom product for you.
Please feel free to contact us if you have any questions or need more information about this product using the New Question tab. Please ONLY SUBMIT product questions. For all other questions go to contact us,
No posts found