A linear gas burner insert for a fire pit that features match lit ignition

Linear Fire Pit Kit -37 Inch- Match Light -Straight

This linear fire pit burner pan can be used with both natural and propane gas. Although this fire pit burner insert is not electronically...
 
$357.00
Price in points: 35700 points
MLFPK37X8-L-FLEX-XX
Available
+
Add to Wishlist

Description

This linear fire pit burner pan can be used with both natural and propane gas. Although this fire pit burner insert is not electronically started, the match light option is convenient and saves some money on the overall purchase price. The nice thing is that this is the simplest type of straight fire pit burner insert you can install in your premade fire pit. If you are building your fire pit after you have this insert, you can easily use this as the center piece so that your fire pit will be made perfectly for your fire pit linear burner insert. With this burner being match lit you are able to adjust the flame size with the key valve provided with the kit. Feel like a nice quiet even home out on your patio, set the flame to low, or if it is a little chilly out but you would still like to enjoy the outdoor then make the flame a little higher. Don't forget to complete the look of your interlocking linear fire burner with fire glass or lava rock. Not only will it give your fire burner the final touch but it will also protect your burner from the direct flames.

 

PLEASE NOTE: This fire pit kit requires a hard pipe, fittings, and an enclosure with an access door for the gas valve. 

How It Works:
  • Start Up: Light a long-stem lighter next to the burner then SLOWLY turn the gas on with the key. The key should be left in valve during use.
  • Operation: You can adjust the height of the flames by turning the key and releasing more or less gas into your fire feature. Counterclockwise adds more flame, and clockwise lowers the flames.
  • Shut Down: To turn off your fire feature just simply turn the key clockwise to the off position, and then remove the key from the unit. Make sure you place your key in a safe place
Specifications:
Material: #304 Stainless Steel
BTU: 65,000
Burner Pan Size: 37 by 8 Inches
Burner Pan Height: 1 1/2 Inches
Burner Size: 36 Inch T-Burner
Fire Glass Needed:  25 Pounds
Lava Rock Needed: 50 Pounds
Features & Benefits: 
  • Fully assembled and ready to install, which means more time for you to enjoy your new fire feature
  • Pan has drilled holes to allow for drainage
  • The flex line configuration provides versatile and simple installation of the unit.
  • Valve mounting bracket included, for safe mounting of control valve
  • Flame height is adjustable with the valve control knob, so you are able to have a low flame for the romantic nights or higher flame to keep you warmer on the chilly nights.
  • Natural gas or liquid propane have been factory built and tested for either fuel type.
  • UL certified in US and Canada to ANSI Z21.97-2014/ CSA 2.41-2014 requirements
  • The sidewall helps with the media retention
  • Pan lip provides for recessed burner
  • Perfect for those fire pits without electricity, and no hassle fire wood
  • Made from 304 Stainless Steel, so it is made to last for many years to come
  • Add fire glass or lava rock a top your burner to keep your burner in pristine condition
  • Weather resistant stainless steel "T" shape burner 
  • Fire jets are precision-drilled for a great burn every time
  • 36" Whistle free flex line, so you have a quiet burning fire 

Mounts with brackets. Requires at least 10" clearance for valve pipe.

Estimated Lead Time

Please allow us 2-4 weeks, plus shipping to create this custom product for you.

Warranty Information

Limited Warranty

Manufactures warranties HWI fire pits against manufacturing defects that prevent safe and correct function as follows:

  • Electronics, Gas Valve, : Commercial-1yr; Residential- 3 yr.
  • Pilot Assy : Commercial-1 yr.; Residential-2 yr.
  • Stainless Steel Pan, Fire Ring, & Valve Box: Commercial-1yr.; Residential 5yrs.

This commences from the date of original sale / shipment from the manufacture FOB Dayton, Ohio.

This warranty is for parts and in-house manufacture labor. The defective product must be sent back to the manufacture with a Return Merchandise Authorization (RMA) issued by the manufacture for that specific product and any other additional information for the nature of the defect or warranty claim.

The warranty does not cover items that have been damaged by overheating, modification, abuse, or improper storage. Also any labor involving installation or maintenance with the unit is not covered.

This warranty excludes claims for consequential, indirect-collateral expenses arising from product defects or warranty recovery.

Product Question

Please feel free to contact us if you have any questions or need more information about this product using the New Question tab. Please ONLY SUBMIT product questions. For all other questions go to contact us,

Reviews

No posts found

Write a review

24 Hour Customer Support Serive