Our 54 inch DIY enclosure allows you to create a fire pit that matches your outdoor décor! We've taken the hassle out of trying to construct a fire pit and figure out which necessary components to use. Our unfinished enclosures come with your choice of 3 ignition type, and a 25" round pan with an 18" penta burner. Complete this fire pit housing unit with your choice of stone, veneer, stucco, or other approved material!
This enclosure is 18 inches high and has an unfinished base made of 22-gauge galvanized steel. A welded frame design makes it durable and sturdy, while the ½” hardiboard shell is light enough to transport with minimal help. Choose your favorite colored fire glass to enhance the look of your completed DIY fire pit and then go ahead and show it off! Remember - we love getting pictures from our customers! If you have any questions about this enclosure, give our fire pit experts a call at 1-888-986-1535!
Choose natural gas or liquid propane - both are compatable with this unit.
You have the choice of a match lit, push button, or electronic ignition system.
Adding outdoor approved media will complete the look of your fire pit. We have made it easy by telling you exactly how much you will need for this fire pit enclosure! The lava rock gives your fire pit a rustic look, and it will also increase combustion efficiency. Fire glass comes in different color options. Choose from a variety of bold reflective glass colors to accent the shade of your fire table. You can be creative and mix and match colors, or choose from one of our multi-colored options. When the fire is lit, it will look like it is shimmering on ice!
|Enclosure Diameter:||54 Inches|
|Enclosure Height:||18 Inches|
|Busner Pan Diameter:||25 Inches|
|Burner Size:||18 Inch Penta|
|Material:||Galvanized Steel/ Hardiboard Cement Board|
|Match Lit Ignition BTU:||65,000|
|Push Button Ignition BTU:||90,000|
|Electronic Ignition BTU:||125,000|
Please allow us 3-4 weeks, plus shipping to create this custom product for you.
BEFORE PURCHASING, PLEASE NOTE THE FOLLOWING:
Manufactures warranties HWI fire pits against manufacturing defects that prevent safe and correct function as follows:
This commences from the date of original sale / shipment from the manufacture FOB Dayton, Ohio.
This warranty is for parts and in-house manufacture labor. The defective product must be sent back to the manufacture with a Return Merchandise Authorization (RMA) issued by the manufacture for that specific product and any other additional information for the nature of the defect or warranty claim.
The warranty does not cover items that have been damaged by overheating, modification, abuse, or improper storage. Also any labor involving installation or maintenance with the unit is not covered.
This warranty excludes claims for consequential, indirect-collateral expenses arising from product defects or warranty recovery.
Please feel free to contact us if you have any questions or need more information about this product using the New Question tab. Please ONLY SUBMIT product questions. For all other questions go to contact us,
No posts found