13 inch electronic ignition system fire pit insert

Round Fire Pit Kit - 13 Inch Electronic Bowl

 
$1,912.00
Price in points: 191200 points
13SSEI
Available
+
Add to Wishlist

Description

Create a beautiful fire pit for all to enjoy with this 13 Inch Fire pit Insert with an Electronic Ignition system that can be controlled with a remote, sold separately. This unit was created with durability in mind, made of 304 stainless steel and weep holes in the burner pan to allow for water drainage, this unit will last for years to come. This 14 Inch Fire pit Insert houses a 12 Inch stainless steel round burner that will create a stunning flame. Putting out 90,000 BTU's Max this fire pit insert will keep you nice and warm on the chillier nights when you want to enjoy the nights a little longer.

The fire is controlled by a simple 120 volt electronic ignition system that can be wired to a standard 120 VAC wiring. Once wired into the building mains, it can be turned off with a switch, optional timer, or even an ON/OFF remote control (sold separately).

You are going to be the envy of the neighborhood when you have this kit installed in your outdoor fire feature! Give us a call at 1-888-986-1535 for more information!

PLEASE NOTE: This fire pit kit requires a hard pipe, fittings, and an enclosure with an access door for the gas valve. 

How Hot Surface Ignition Works:
  • Start up: This is done by use of a wall switch or remote control. When the "On" command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame is present, the main burner gas will flow and be ignited by the pilot flame.
  • Operation: While sitting and enjoying the look and feel of your fire pit, the system is at work monitoring the status of the flame, internal temperatures, voltage and other safety parameters. If the flame happens to go out the system will turn off all gas flow, and then restart by automatically commencing the START sequence.
  • Shut Down: To turn OFF the fire pit simply use wall switch, remote control or whole house system.

We recommend that you read your manual thoroughly for additional operating specs and safety features.

Specifications:
Material: 304 Stainless Steel 
BTU: 90,000
Burner Pan Diameter: 13 Inch Inch
Burner Size: 12 Inch Round
Fire Glass Needed:  20 Pounds
Lava Rock Needed: 25 Pounds
Features & Benefits: 
  • Fully assembled and ready to install. Control components are protected within valve box.
  • Requires wall switch, remote, or timer to operate - sold separately.
  • Ignition is complete using a robust and reliable hot surface igniter.
  • 120vac: Standard outdoor grounded power cord - simply plug into GFCI outlet.
  • Internal temperature monitoring with overheat auto shutoff.
  • 18 gauge stainless steel pan is durable and weather resistant.
  • Weather resistant stainless steel "penta" burner.
  • Precision drilled holes act as fire jets, giving you the best burn every time!
  • Your choice of natural gas or liquid propane.
  • Stainless steel valve control box is weather resistant.
  • Impervious to weather conditions.
  • CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements. (This new electronic system already meets upcoming 2018 ANSI requirements).

Each kit requires at least a 2" clearance underneath for ignition system and hookups.

Estimated Lead Time

Please allow us 2-4 weeks, plus shipping to create this custom product for you.

Warranty Information

Limited Warranty

Manufactures warranties HWI fire pits against manufacturing defects that prevent safe and correct function as follows:

  • Electronics, Gas Valve, : Commercial-1yr; Residential- 3 yr.
  • Pilot Assy : Commercial-1 yr.; Residential-2 yr.
  • Stainless Steel Pan, Fire Ring, & Valve Box: Commercial-1yr.; Residential 5yrs.

This commences from the date of original sale / shipment from the manufacture FOB Dayton, Ohio.

This warranty is for parts and in-house manufacture labor. The defective product must be sent back to the manufacture with a Return Merchandise Authorization (RMA) issued by the manufacture for that specific product and any other additional information for the nature of the defect or warranty claim.

The warranty does not cover items that have been damaged by overheating, modification, abuse, or improper storage. Also any labor involving installation or maintenance with the unit is not covered.

This warranty excludes claims for consequential, indirect-collateral expenses arising from product defects or warranty recovery.

Product Question

Please feel free to contact us if you have any questions or need more information about this product using the New Question tab. Please ONLY SUBMIT product questions. For all other questions go to contact us,

Reviews

No posts found

Write a review
Last updated on June 8th 2017.

24 Hour Customer Support Serive

Subscribe To Our Newsletter

Get the latest news, reviews, and deals in your email!