Now you can easily convert your DIY fire pit into a gas burning feature with this 36 inch flat pan insert. The 30 inch star shaped penta burner has a full flame effect that creates a perfect fire display! Arriving at your door fully assembled and ready to install, your certified gas contractor can simply insert the burner into your fire pit or fire bowl. With the choice of an optional handheld remote or ON/OFF wall switch, you will be able to have full control of your fire feature.
To ensure you get the most out of the burner's brilliant effect, don't forget to add a layer of protection with fire media! We recommended a specific amount of lava rock to ensure the entire modeler is covered. For a shimmery effect, finish off the top layer with fire glass! (We've included all the details for the amounts you will need in the specifications chart.)
Constructed from durable 304 stainless steel, this weather resistant kit is built to last. Weep holes are located at the bottom of the burner allowing for moisture to escape the unit. This kit includes a bendable flex fuel line and gas valve, complete with a key, escutcheon, and mounting plate.
You are going to be the envy of the neighborhood when you have this kit installed in your outdoor fire feature! Call us at 1-888-986-1535 for more information!
PLEASE NOTE: This fire pit kit requires a hard pipe, fittings, and an enclosure with an access door for the gas valve.
We recommend that you read your manual thoroughly for additional operating specs and safety features.
|Material:||18 Gauge Stainless Steel|
|Burner Pan Diameter:||36 Inch|
|Burner Size:||30 Inch Penta Star|
|Fire Glass Needed:||110 Pounds|
|Lava Rock Needed:||100 Pounds|
Each kit requires at least a 2" clearance underneath for ignition system and hookups.
Please allow us 2-4 weeks, plus shipping to create this custom product for you.
Manufactures warranties HWI fire pits against manufacturing defects that prevent safe and correct function as follows:
This commences from the date of original sale / shipment from the manufacture FOB Dayton, Ohio.
This warranty is for parts and in-house manufacture labor. The defective product must be sent back to the manufacture with a Return Merchandise Authorization (RMA) issued by the manufacture for that specific product and any other additional information for the nature of the defect or warranty claim.
The warranty does not cover items that have been damaged by overheating, modification, abuse, or improper storage. Also any labor involving installation or maintenance with the unit is not covered.
This warranty excludes claims for consequential, indirect-collateral expenses arising from product defects or warranty recovery.
Please feel free to contact us if you have any questions or need more information about this product using the New Question tab. Please ONLY SUBMIT product questions. For all other questions go to contact us,
No posts found