24" flat square pan with 18" penta burner and variable flame height 120 volt electronic ignition.

Smartphone and tablet are NOT included!

Square Fire Pit Kit - 24 Inch Hi/Lo Remote Ignition

Price in points: 237900 points
Add to Wishlist


Our top of the line fire pit kit just got even better! It now has an electronic ignition system with a Hi/Lo remote that can be controlled by an app on your mobile device. This allows you to adjust the height of the flame from the comfort of your outdoor lounge chair. It is our goal here at Fireside Xpressions to give our customers the best, and this ignition system is it!

This 24" kit has a square flat pan with an 18" penta burner. Count on the reliability of stainless steel to ensure weather and corrosion resistance. Call us at 1-888-986-1535 for more information!

PLEASE NOTE: This fire pit kit requires a hard pipe, fittings, and an enclosure with an access door for the gas valve. 

How It Works:
  • Start Up: This is done by use of a wall switch or remote control (or smart phone on Hi/Lo Models. When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame.
  • Operation: While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures/voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence.
  • High / Low Flame Control Models: This option includes a remote control and smart phone app with 2-way communication with the fire pit. Remote allows flame height control while receiving information from fire pit to advise user of fire pit status (flashing LED).
  • Shut Down: To turn OFF the fire pit simply use wall switch, remote control or smart phone.

We recommend that you read your manual thoroughly for additional operating specs and safety features.

Material: 16 Gauge Stainless Steel
BTU: 125,000
Voltage: 120 Volts AC
Burner Pan Diameter: 24 Inch
Burner Size: 18 Inch Penta Star
Fire Glass Needed:  65 Pounds
Lava Rock Needed: 50 Pounds
Operating System (OS):  Apple iOS and Android Compatible 
Communication Protocol: Connects via Bluetooth 
Features & Benefits: 
  • Fully Assembled - ready to install. Control components are protected within a stainless steel valve box.
  • Start via wall switch, remote or whole house system. Auto re-light if flame is lost.
  • Ignition is complete using a robust and reliable Hot Surface igniter.  
  • High/Low Flame Control: Adjust high setting to low setting- ~45% turndown (Remote Control and Smart Phone App included).
  • 120 vac: Standard outdoor grounded power cord- simply plug into GFCI outlet.  
  • Natural Gas or Liquid Propane: Factory built & tested for either fuel. Internal temperature monitoring with overheat auto shutoff.
  • CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements. (This new EI system already meets upcoming 2018 ANSI requirements)!
Important Information:
  • For outdoor use only!
  • Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. READ the installation, operating and maintenance instructions thoroughly before installing or servicing the equipment!
  • We HIGHLY recommend having a certified gas installer install your fire feature ignition system
  • For use with fixed piping systems only, Not for use with small tanks
  • All enclosures require 4 each of 18-square-inch vents on opposing sides, as well as adequate drainage.
  • Gas Supply:
    • Natural Gas Operating Supply Pressure: Minimum: 6.0" W.C.; Maximum: 7.0" W.C.
    • LP Gas Operating Supply Pressure: Minimum = 10.0" W.C.; Maximum: 11.0" W.C.
  • Fuel Supply For "Hi/Lo" Systems - It is necessary to supply your Hi/Lo fire feature with 1.5 times the maximum rated BTU. This will ensure there is enough pressure for your high/low function to work properly. This requirement does not increase the amount of fuel your appliance will consume during normal operation. (Example: A 200K BTU fire pit should be supplied with 300K BTU fuel capacity.)

Estimated Lead Time

Please allow us 2-4 weeks, plus shipping to create this custom product for you.

Warranty Information

Limited Warranty

Manufactures warranties HWI fire pits against manufacturing defects that prevent safe and correct function as follows:

  • Electronics, Gas Valve, : Commercial-1yr; Residential- 3 yr.
  • Pilot Assy : Commercial-1 yr.; Residential-2 yr.
  • Stainless Steel Pan, Fire Ring, & Valve Box: Commercial-1yr.; Residential 5yrs.

This commences from the date of original sale / shipment from the manufacture FOB Dayton, Ohio.

This warranty is for parts and in-house manufacture labor. The defective product must be sent back to the manufacture with a Return Merchandise Authorization (RMA) issued by the manufacture for that specific product and any other additional information for the nature of the defect or warranty claim.

The warranty does not cover items that have been damaged by overheating, modification, abuse, or improper storage. Also any labor involving installation or maintenance with the unit is not covered.

This warranty excludes claims for consequential, indirect-collateral expenses arising from product defects or warranty recovery.

Product Question

Please feel free to contact us if you have any questions or need more information about this product using the New Question tab. Please ONLY SUBMIT product questions. For all other questions go to contact us,


No posts found

Write a review
Last updated on June 8th 2017.

24 Hour Customer Support Serive

Subscribe to our mailing list

* indicates required