With a fire pit burner kit, building a fire pit has never been so simple. This Burning Spur is constructed of 304 stainless steel to withstand the outdoor elements and boasts 65,000 BTUs. An internal dam built inside the center of the Burning Spur hub helps prohibit water from flowing back into the gas line. The legs of the burner are also pitched to allow water to run off easily. Cooling points between the legs of the burner help prevent heat transfer to the outer edge which can cause cracking of the fire pit finished top. The bottom features weep holes for water release so there is no freeze and thaw damage.
The Match lit Thermocouple Manual Safety (TMS) System in essence, is a fail safe system that cuts off the gas supply in the event of a failure with the pilot flame. If the pilot flame blows out or is extinguished for whatever reason, the Thermocouple cools and the pilot valve snaps shut. This effectively shuts off the gas supply to the system.
PLEASE NOTE: This fire pit kit requires a hard pipe, fittings, and an enclosure with an access door for the gas valve
|Material:||#304 Stainless Steel|
|Burner Pan Size:||32 Inches|
|Burner Size:||22 Inch Spur Burner|
|Pan Depth:||2 3/4 Inches|
|Install Opening:||32 1/4 Inch MIN. -- 33 3/4 Inch MAX.|
18 Inches from the ground
69 Inches from the ceiling
Please allow us 2-4 weeks, plus shipping to create this custom product for you.
Please feel free to contact us if you have any questions or need more information about this product using the New Question tab. Please ONLY SUBMIT product questions. For all other questions go to contact us,
No posts found