A simple look can go a long way! This stylish Tempe fire and water bowl is a vision of beauty with flickering flames on top and a tranquil cascade of water from the spout. This 31" round scupper-style bowl features a smooth oil rubbed copper finish, a 19" round pan with a 12" stainless steel penta burner, and all the needed hardware for your fire and water table. This is an easy install for your contractor! Remember to add fire glass or lava rock to your fire and water bowl for a complete look.
PLEASE NOTE: Fire glass can be used with natural gas burning features ONLY. Fireside Expressions is adamant about this for the safety of our valued customers. Because propane is heavier than natural gas, it will sink to the bottom of your feature. Small pieces of fire glass will not allow propane to circulate, and this can lead to the explosion of this particular media. Even with larger fire glass pieces, there is still not enough room for the gas to dissipate from wind and other factors. Lava rock allows propane to dissipate and is the safest choice for propane features.
With a twist of the quarter turn valve and a long stem lighter, your fire bowl will be lit in seconds! Turn the valve to adjust the height of the flames. Use the valve to turn fire bowl off or on.
*The Tempe model requires you to have the match light module mounted outside of the fire bowl. That means your fire bowl will need to be on a pedestal or mounted in a way that the match light module can fit below it.
The ignition system does a safety check before it turns on the gas. When the hot surface igniter starts to glow, your fire bowl is ready to light up the night!
*The Tempe fire bowl, when using the electronic ignition system, can be mounted on the ground or pedestal. The ignition system is small enough to be housed within the fire bowl.
|Bowl Top Diameter:||31 Inches|
|Bowl Base Diameter:||8 Inches|
|Bowl Height:||11 Inches|
|Fire Pit Insert Pan:||19 Inches|
|Burner Size:||12 Inch Penta Burner|
|Power:||24 Volt AC|
|Bowl Material:||Copper With Oil Rubbed Finish|
Usually ships within 3-4 weeks, though can take longer depending on order volume.
Hearth Product Controls Company warranties product against manufacturing defects that prevent safe and correct operation of the product commencing from the date of original sale or shipment from HPC. The warranty on parts and in-house labor will apply only to claims presented to us by our original customer and is in lieu of all other warranties expressed or implied . The defective product must be shipped back with a Return Merchandise Authorization (RMA) issued by HPC for that specific product which states the nature of the defect or warranty claim.
Please feel free to contact us if you have any questions or need more information about this product using the New Question tab. Please ONLY SUBMIT product questions. For all other questions go to contact us,
No posts found