The Outdoor Plus Tempered Glass Wind Guard OPT-WG-1414

The Outdoor Plus 14" x 14" x 8" Square Tempered Glass Wind Guard provides a clear protective barrier around the flames of a compatible outdoor fire feature. Its four polished tempered glass panels help reduce the effects of wind while maintaining an open view of the fire.

Made in the USA, this square wind guard uses 1/4" thick clear tempered glass assembled with chrome 90-degree brackets. Silicone rubber support feet provide contact points between the wind guard and the surface below.

The 8" height helps shield flames in windy conditions while adding a clean, finished appearance to a fire table or fire pit. The glass barrier can also help reduce the chance of unintentional contact with the flames. For proper placement, always maintain at least 2" of clearance between the glass and the flames.

Key Features: Made from clear, polished tempered glass for an unobstructed view of the fire. The square configuration measures 14" long by 14" wide by 8" high and includes four glass panels, chrome connecting brackets, silicone rubber support feet, and fastening hardware.

Important Information: This wind guard is intended to help protect flames from wind; it does not eliminate the hazards associated with an open flame. Maintain a minimum 2" gap between the glass and the flames during use.

FAQs: 

Q: What are the dimensions of this wind guard?
A: The assembled wind guard measures 14" long x 14" wide x 8" high.

Q: How thick is the glass?
A: The wind guard uses 1/4" thick polished tempered glass.

Q: What is included with the wind guard?
A: It includes four tempered glass panels, 90-degree angle brackets, rubber support feet, and fastening hardware.

Q: How much clearance should there be between the glass and the flames?
A: Always maintain a minimum 2" gap between the glass and the flames.

Fit / Measuring / Safety Notes:

• Confirm the 14" x 14" footprint is appropriate for your fire feature before ordering.
• Maintain at least 2" of clearance between the glass and the flames.
• Do not position the glass directly against or within the flame area.
• Follow The Outdoor Plus installation instructions when assembling and positioning the wind guard.
• Tempered glass and surrounding components may become hot during fire feature operation; avoid contact while hot.

Check Out Our Other Products:

• Patio Heaters
• Outdoor Lighting
• Fire Urns & Sculpture